Видео

with the Balanset-1A Device

Preparing the Necessary Tools

• vibration sensors, optical speed sensor, magnetic base, software package, and included accessories.
• Establish a USB connection between the instrument and the computer, ensuring the software is set up properly.

Setting Up the Sensors

• Mount the vibration transducers securely on the machine's housing where vibrations are most pronounced, typically near the bearings.
• Aim the optical rpm sensor at the rotating shaft and apply a reflective strip to the shaft for phase angle data acquisition.

Software Startup

• Initiate the Balanset program on your computer.
• Choose the correct balancing method (single or two-plane) according to the rotor configuration and the balancing task.

Taking Baseline Vibration Readings

• Operate the rotor at its intended working speed.
• The application will acquire data on vibration magnitude, rotational velocity, and phase angle to determine the initial imbalance state.

Attaching the Trial Weight

• Halt the rotation and mount a test weight at a designated position on the rotor, with the weight's value entered into the software (usually in grams).
• Restart the rotor, and the software will record the changes in vibration level and phase angle.

Computing the Compensating Weight

• Based on the measured data, the software automatically calculates the correction weight parameters: mass and installation angle.
• These parameters are displayed on the screen as numerical data and graphs.

Mounting the Compensating Weight

• Mount the calculated corrective weight onto the rotor at the specified location and angle.
• You can conduct interim measurements to confirm that the imbalance is decreasing as expected.

Verification and Balancing Completion

• With the compensating weight attached, operate the rotor and assess the level of any residual vibration.
• If the vibration level is within acceptable limits (according to ISO 1940), the balancing is complete.
• If the vibration is still outside acceptable limits, reiterate the process and fine-tune the compensating weight.

Report Generation

• All balancing results are logged and archived within the software, from which you can produce a printable report summarizing the vibration levels, compensating weight, and its installation position.

Post-Balancing Checklist

• Verify the secure attachment of all balancing weights and measurement sensors.
• Confirm that the rotor spins freely and quietly, without any unusual sounds or vibrations.
• In cases where the rotor is integrated into a more complex system, ensure the correct operation and interaction of all related components.

This process allows for precise imbalance correction, reducing vibration and extending equipment life.

Instagram: https://www.instagram.com/vibromera_ou/ Youtube : https://youtu.be/guA6XJ-ArZM?si=vmkuX7RILzKBl0zL Our website about Predictive maintenance Machinio: https://www.machinio.com/listings/98380186-portable-balancer-vibration-analyzer-balanset-1a-full-kit-in-portugal Facebook: https://www.facebook.com/marketplace/item/350151228150722 https://listingbookmarks.com/story16910188/balanset-revolutionizing-dynamic-balancing